Medium intensity LED aviation obstruction light

Short Description:

It is PC and steel omnidirectional red LED aviation obstruction light. It is used to remind pilots that there are obstacles at night, and to pay attention in advance to avoid hitting obstacles.

It works in flashing at night, as required by ICAO and FAA. User can specify nighttime flashing, or custom 24 hour flashing/fixed.


Product Detail

Product Tags

Application

Suitable for installation on fixed buildings, structures, such as electric power towers, communication towers, chimneys, high-rise buildings, large bridges, large port machinery, large construction machinery, wind turbines and other obstacles.

Production Description

Compliance

- ICAO Annex 14, Volume I, Eighth Edition, dated July 2018
- FAA  150/5345-43H L-864

Key Feature

● Cover of the light adopts PC with anti-UV which is high efficiency light transmission up to 92%, quite high impact resistance and fits the bad environment very well.

● Holder of the light is made of aluminum alloy and painted by spraying plastics, the structure is high strength, resistance to corrosion.

● Use the special optical reflector design, the visual range further, angle more accurate, no light pollution.

● Light source adopts import high quality LED, lifespan up to 100,000 hours, low power consumption, energy efficiency and environmental protection.

● Based on the single chip computer control, automatic identification sync signal, do not distinguish the main light and auxiliary light, and also could be controlled by the controller.

● Same power supply voltage with synchronous signal, integrate in power supply cable, eliminate the damage by error installation caused.

● Used the photosensitive probe fit for the natural light spectrum curve, automatic control light intensity level.

● The circuit of the light has surge protection, so that the light is suitable for a harsh environment.

● Integral structure, protection level of Ip66.

● GPS synchronizing function is available.

Product Structure

CK-15-T

Parameter

Light  Characteristics
Light  source LED
Color Red
Lifespan of LED 100,000hours (decay<20%)
Light  intensity 2000cd at night
Photo sensor 50Lux
Flash  frequency Flashing / Steady
Beam Angle 360° horizontal beam angle
≥3°vertical beam spread
Electrical Characteristics
Operating Mode 12VDC
Power Consumption 3W /5W
Physical Characteristics
Body/Base Material Steel, aviation yellow painted
Lens  Material Polycarbonate UV stabilized,good impact resistance
Overall Dimension(mm) 195mm×195mm×396mm
Mounting Dimension(mm) Ф127mm -4×M10
Weight(kg) 17kg
Solar Power Panel
Solar panel Type Monocrystalline silicon
Solar Panel Dimension 320.8*230*5mm
Solar Panel Power Consumption/Voltage 42W/18V
Solar Panel Lifespan 20 years
Batteries
Battery Type Lead-acid battery
Battery Capacity 24Ah
Battery Voltage 12V
Battery Lifespan 5 years
Environmental Factors
Ingress Grade IP66
Temperature Range -55℃ to 55℃
Wind  Speed 80m/s
Quality Assurance ISO9001:2015

Ordering Codes

Main P/N Type Power Flashing NVG Compatible Options
CK-15-T [Blank]:2000cd AC:110VAC-240VAC Type C: Steady [Blank]: only Red LEDS P: Photocell
CK-16-T(Blue Bottom) DC1:12VDC F20: 20FPM NVG: only IR LEDs D: Dry Contact (connect BMS)
CM-13-T(Red Color Lamp Cover) DC2:24VDC F40:40FPM RED-NVG: dual Red/IR LEDs G: GPS
DC3:48VDC F60:60FPM

  • Previous:
  • Next: